The Temperature Table dialog presents the temperatures measured by the camera or a corresponding hardware expansion (e.g. a MOBOTIX ExtIO) in a structured table.
If your MOBOTIX camera is attached to such a hardware expansion, open the Manage Hardware Expansions dialog to configure the expansion.
The Current Temperatures section shows the current time/date and the measured temperatures (reloading the page will update these temperatures). In addition, you can set an offset (positive or negative) that will be added to the measured temperature (and thus also to the Temperature History).
The Temperature History section lists the temperatures measured every hour during the last four days in a table.
Rows: Time (hours)
Columns: Days (format MM-DD)
If a temperature field contains ---- the camera could not obtain any temperature measurements (e.g., because the camera or the hardware expansion had been switched
off).
|
Option |
Parameter |
|---|---|
|
Offset °C |
You can use the temperature offset (in degrees Centigrade) to correct small deviations from the temperatures measured by the camera or hardware expansion to the actual temperatures. The camera applies the offset to the current temperature as well as all measurements recorded in the temperature table. |
Haga clic en el botón Establecer para activar su configuración y guardarla hasta el próximo reinicio de la cámara.
Haga clic en el botón Fábrica para cargar todos los ajustes de fábrica para este cuadro de diálogo (puede que no todos los cuadros de diálogo tengan este botón).
Haga clic en el botón Restaurar para deshacer los cambios más recientes que no se han almacenado en la cámara de forma permanente.
Haga clic en el botón Cerrar para cerrar los cuadros de diálogo. Mientras se cierra el cuadro diálogo, el sistema comprueba la configuración completa en busca de cambios. Si se detectan cambios, el sistema le preguntará si desea almacenar toda la configuración permanentemente.